| 1 |
BIS For Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems |
IS 16542: 2016 |
| 2 |
BIS For All Glass Evacuated Tubes Solar Water Heating System |
IS 16544: 2016 |
| 3 |
BIS For Solar Flat Plate Collector for Solar Water Heating Systems |
IS 12933 (Part 1): 2003 |
| 4 |
BIS For Fibre Ropes Of Polyester / Polyolefin dual Fibres |
IS 17609 : 2021 |
| 5 |
BIS For Fibre Ropes ? Polyethylene ?3- And 4-Strand Ropes |
IS 8674 : 2013 |
| 6 |
BIS For Fibre Ropes ? Polypropylene Split Film, Monofilament And Multifilament ( PP2 ) and Polypropylene High-Tenacity Multifilament ( PP3 ) ?3-, 4-, 8- and 12- Strand Ropes |
IS 5175:2022 |
| 7 |
BIS For Fibre Ropes ? Polyamide ? 3-, 4-, 8- and 12- Strand Ropes |
IS 4572:2022 |
| 8 |
BIS For Steel wire ropes ? Fibre main cores ? Specification |
IS 1804:2004 |
| 9 |
BIS For Mixed Polyolefin Fibre Ropes |
IS 14929: 2022 |
| 10 |
BIS For Textiles ? Composite Synthetic Fibre Ropes ? Specification |
IS 14928:2001 |
| 11 |
BIS For Fibre Ropes ? Polyester ? 3-, 4-, 8- and 12- Strand Ropes |
IS 11066:2022 |
| 12 |
BIS For Textiles ? Manila Ropes ? Specification |
IS 1084:2005 |
| 13 |
BIS For Textiles ? Flat woven webbing slings made of man-made fibres for general services |
IS 15041:2001 |
| 14 |
BIS For Combination Side Cutting Pliers |
IS 3650:1981 |
| 15 |
BIS For Pipe Wrenches ? Heavy Duty |
IS 4003 (Part 2): 1986 |
| 16 |
BIS For Pipe Wrenches ?General Purpose |
IS 4003 (Part 1): 1978 |
| 17 |
BIS For Ring Wrenches (Spanners) |
IS 2029:1998 |
| 18 |
BIS For Open-Jaw Wrenches (Spanners) |
IS 2028:2004 |
| 19 |
BIS For Single-ended Open-jaw Adjustable Wrenches |
IS 6149:1984 |
| 20 |
BIS For Ring Slugging Wrenches (Spanners) |
IS 4509:1992 |
| 21 |
BIS For Open Ended Slugging Wrenches (Spanners) |
IS 4508:1992 |
| 22 |
BIS For Chain Pipe Wrenches |
IS 4123:1982 |
| 23 |
BIS For Hand held electric Engraving Tools |
|
| 24 |
BIS For Electric Hand Lamps |
|
| 25 |
BIS For Commercial Vacuum Packaging Appliances |
|
| 26 |
BIS For Furniture with Electrically Motorized Parts |
|
| 27 |
BIS For Skin Beauty Care Appliances |
|
| 28 |
BIS For Personal-eTransporters |
|
| 29 |
BIS For Beauty Care Appliances Incorporating Lasers and Intense Light Sources |
|
| 30 |
BIS For Electrolysers |
|
| 31 |
BIS For Gas, Oil and Solid-Fuel Burning Appliances Having Electrical Connections |
|
| 32 |
BIS For Vaporizers |
|
| 33 |
BIS For Commercial Electric Hoods |
|
| 34 |
BIS For Humidifiers |
|
| 35 |
BIS For Drives for Vertically Moving Garage Doors for Residential Use |
|
| 36 |
BIS For Fabric Steamers |
|
| 37 |
BIS For Toilet Appliances |
|
| 38 |
BIS For Amusement Machines and Personal Service Machines |
|
| 39 |
BIS For Foot Warmers and Heating Mats |
|
| 40 |
BIS For Outdoor Barbecues |
|
| 41 |
BIS For Fixed Immersion Heaters |
|
| 42 |
BIS For Water-Bed Heaters |
|
| 43 |
BIS For Air-Cleaning Appliances |
|
| 44 |
BIS For Commercial Electric Kitchen Machines |
|
| 45 |
BIS For Commercial Electric Rinsing Sinks |
|
| 46 |
BIS For Thermal Storage Room Heaters |
|
| 47 |
BIS For Whirlpool Baths and Whirlpool Spas |
|
| 48 |
BIS For Commercial Electric Dishwashing Machines |
|
| 49 |
BIS For Electrical Appliances for use with Aquariums and Garden Ponds |
|
| 50 |
BIS For Surface-Cleaning Appliances for Household use Employing Liquids or Steam |
|
| 51 |
BIS For Sauna Heating Appliances and Infrared Cabins |
|
| 52 |
BIS For Oral Hygiene Appliances |
|
| 53 |
BIS For Commercial Electric BainsMarie |
|
| 54 |
BIS For Commercial Electric Appliances for keeping Food and Crockery Warm |
|
| 55 |
BIS For Commercial Electric Grillers and Toasters |
|
| 56 |
BIS For Commercial Electric Boiling Pans |
|
| 57 |
BIS For Clothes Dryers and Towel Rails |
|
| 58 |
BIS For Commercial Electric Forced Convection Ovens, Steam Cookers and Steam ? Convection Ovens |
|
| 59 |
BIS For Commercial Electric Multi ? purpose Cooking Pans |
|
| 60 |
BIS For Commercial Electric Griddles and Griddle Grills |
|
| 61 |
BIS For Commercial Electric Doughnut Fryers and Deep Fat Fryers |
|
| 62 |
BIS For Commercial Electric Cooking Ranges, Ovens, Hobs and Hob Elements |
|
| 63 |
BIS For Appliances for Skin Exposure to Optical Radiation |
|
| 64 |
BIS For Blankets, Pads, Clothing and Similar Flexible Heating Appliances |
|
| 65 |
BIS For Food Waste Disposers |
|
| 66 |
BIS For Floor Treatment Machines and Wet Scrubbing Machines |
|
| 67 |
BIS For Dishwashers |
|
| 68 |
BIS For Low Speed Food Grinding Machines |
|
| 69 |
BIS For Single Walled Baking Ovens |
|
| 70 |
BIS For Electric Hot Plates |
|
| 71 |
BIS For Slicing Machines |
|
| 72 |
BIS For Electric Sieving Machines |
|
| 73 |
BIS For Electric Shredders |
|
| 74 |
BIS For Electric Potato Peelers |
|
| 75 |
BIS For Electric Noodle Makers |
|
| 76 |
BIS For Electric Knives |
|
| 77 |
BIS For Electric Knife Sharpeners |
|
| 78 |
BIS For Electric IceCream Machines, including those for use in refrigerators and freezers |
|
| 79 |
BIS For Electric Graters |
|
| 80 |
BIS For Electric Grain Grinders not exceeding 3l hopper capacity |
|
| 81 |
BIS For Electric Food Processors |
|
| 82 |
BIS For Electric Egg Beaters |
|
| 83 |
BIS For Electric Cream Whippers |
|
| 84 |
BIS For Electric Coffee Mills not exceeding 500g hopper capacity |
|
| 85 |
BIS For Electric Citrusfruit Squeezers |
|
| 86 |
BIS For Electric Churn |
|
| 87 |
BIS For Electric Centrifugal Juicers |
|
| 88 |
BIS For Electric Can Openers |
|
| 89 |
BIS For Electric Berryjuice Extractors |
|
| 90 |
BIS For Electric Bean Slicers |
|
| 91 |
BIS For Electric Coffee Makers |
|
| 92 |
BIS For Electric Water Boilers |
|
| 93 |
BIS For Electric Call Bells and Buzzers for Indoor Use |
|
| 94 |
BIS For Electric Fence Energizers |
|
| 95 |
BIS For Insect Killers |
|
| 96 |
BIS For Electric Steam Cookers |
|
| 97 |
BIS For Electric Heating Tools |
|
| 98 |
BIS For Electric Forced Convection Ovens, Steam Cookers and Steam -Convection Ovens |
|
| 99 |
BIS For Massage Appliances |
|
| 100 |
BIS For Appliances for Heating Liquids |
|
| 101 |
BIS For Frying Pans, Deep Fat Fryers and similar appliances |
|
| 102 |
BIS For Warming Plates and Similar Appliances |
|
| 103 |
BIS For Tumbler Dryers |
|
| 104 |
BIS For Electrical Shavers Hair, Clippers and Similar Appliances |
|
| 105 |
BIS For Cooking Ranges, Hobs, Ovens and Similar Appliances |
|
| 106 |
BIS For Spin Extractors |
|
| 107 |
BIS For Vacuum Cleaners and Water Suction Cleaning Appliances |
|
| 108 |
BIS For All Electrical Appliances |
IS 302 (Part 1) : 2008 |
| 109 |
BIS For Cross-recessed Countersunk Head Wood Screws ? Specification |
IS 18509 : 2023 |
| 110 |
BIS For Chipboard Screws ? Specification |
IS 18508 : 2024 |
| 111 |
BIS For Drywall Screws ? Specification |
IS 18507 : 2024 |
| 112 |
BIS For Raised countersunk head screws (Common Head Style) with type H or type Z cross recess ? Product grade A |
IS 7486 : 2018/ ISO 7047 : 2011 |
| 113 |
BIS For Countersunk flat head screws (common head style) with type H or Type Z Cross Recess ? Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non ? Ferrous Metal Screws |
7485 (Part 2) : 2018/ISO 7046-2 : 2011 |
| 114 |
BIS For Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess ? Product Grade A Part 1 Steel Screws of Property Class 4.8 |
IS 7485 (Part 1) : 2018/ ISO 7046 -1 : 2011 |
| 115 |
BIS For Pan Head Screws With Type H or Type Z Cross Recess ? Product Grade A |
IS 7483 : 2018/ ISO 7045 : 2011 |
| 116 |
BIS For Cross Recessed Tapping Screw Part 3 Raised Countersunk Oval Head |
IS 18480 (Part 3) :2023/ ISO 7051 : 2011 |
| 117 |
BIS For Cross Recessed Tapping Screws Part 2 Countersunk Flat Head |
IS 18480 (Part 2) :2023/ ISO 7050 : 2011 |
| 118 |
BIS For Cross Recessed Tapping Screws: Part 1 Pan Head |
IS 18480 (Part 1) :2023/ ISO 7049 : 2011 |
| 119 |
BIS For Fasteners ? Hexagon Washer Head Drilling Screws with Tapping Screw Thread |
IS 18476 : 2023/ ISO 15480:2019 |
| 120 |
BIS For Fasteners ? Cross Recessed Drilling Screws with Tapping Screw Thread Part 3 Raised Countersunk Head |
IS 18471 (Part 3) :2023/ ISO 15483:1999 |
| 121 |
BIS For Fasteners ? Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head |
IS 18471 (Part 2) :2023/ ISO 15482:1999 |
| 122 |
BIS For Fasteners ? Cross Recessed Drilling Screws with Tapping Screw Thread Part 1 Pan Head |
IS 18471 (Part 1) : 2023/ ISO 15481:1999 |
| 123 |
BIS For Telescopic Ball Bearing Drawer Slide |
IS 17954:2023 |
| 124 |
BIS For Transmission Devices ? V ? Belts endless narrow V-Belts for industrial use |
IS 14261: 1995 |
| 125 |
BIS For V-Belts ? Endless V-Belts for Industrial Purposes ? fire resistant and antistatic V-Belts |
IS 2494 (Part 2): 1993 |
| 126 |
BIS For V-Belts ? Endless V-Belts for Industrial Purposes ? General Purpose |
IS 2494 (Part 1): 1994 |
| 127 |
BIS For Mini domestic water heater for use with piped natural gas (PNG)s |
IS 17150: 2019 |
| 128 |
BIS For Stationary storage type electric water heaters |
IS 2082: 2018 |
| 129 |
BIS For Electric Immersion Water Heaters |
IS 368: 2014 |
| 130 |
BIS For Appliances for electric instantaneous water heaters |
IS 302 (Part 2/Sec 35): 2017 |
| 131 |
BIS For Appliances for stationary storage type electric water heaters |
IS 302 (Part 2/Sec 21): 2018 |
| 132 |
BIS For Gypsum Plaster Boards ? Reinforced Gypsum Plaster Boards and Ceiling Tiles |
IS 2095 (Part 3):2022 |
| 133 |
BIS For Gypsum Plaster Boards ? Coated/ Laminated Gypsum Plaster Boards |
IS 2095 (Part 2): 2022 |
| 134 |
BIS For Glass Fibre Reinforced Gypsum Panels |
IS 17400:2021 |
| 135 |
BIS For Gypsum plaster boards ? Specification: Part 1 plain gypsum plaster boards |
IS 2095 (Part 1):2011 |
| 136 |
BIS For Ferrules for water services |
IS 2692: 1989 |
| 137 |
BIS For Water meters (domestic type) |
IS 779: 1994 |
| 138 |
BIS For Water meters (bulk type) |
IS 2373:1981 |
| 139 |
BIS For Fibre Reinforced Cement Products ? Long Corrugated or Asymmetrical Section Sheets and Fittings for Roofing and Cladding |
IS 14871:2000 |
| 140 |
BIS For Fibre Cement Flat Sheets |
IS 14862:2000 |
| 141 |
BIS For Shallow Corrugated Asbestos Cement Sheets |
IS 13008:1990 |
| 142 |
BIS For Asbestos Cement Pressure Pipes (Light Duty) |
IS 9627:1980 |
| 143 |
BIS For Asbestos Cement Cable Conduits and Troughs |
IS 8870:1978 |
| 144 |
BIS For Silica-Asbestos-Cement Flat Sheets |
IS 13000:1990 |
| 145 |
BIS For Asbestos ? Cement Pipes and Fittings for Sewerage and Drainage |
IS 6908:1991 |
| 146 |
BIS For Asbestos Cement Building Boards |
IS 2098:1997 |
| 147 |
BIS For Asbestos Cement Flat Sheets |
IS 2096:1992 |
| 148 |
BIS For Asbestos Cement Pressure Pipes and Joints |
IS 1592:2003 |
| 149 |
BIS For Corrugated and Semi ? Corrugated Asbestos Cement Sheets |
IS 459:1992 |
| 150 |
BIS For Safety of household and similar electrical appliances ? particular requirements ? domestic electric clothes washing machines |
IS 302 (Part 2/Sec 7): 2010 |
| 151 |
BIS For Safety of Household and Similar Electrical Appliances ? Particular Requirements ? Commercial Dispensing Appliances and Vending Machines |
IS 302 (Part 2/Sec 75): 2018 |
| 152 |
BIS For Household and similar electrical appliances ? Safety ? particular requirements for fans |
IS 302 (Part 2/ Sec 80): 2017 |
| 153 |
BIS For Safety of household and similar electrical appliances ? particular requirements ? appliances for skin or hair care |
IS 302 (Part 2/Sec 23): 2009 |
| 154 |
BIS For Safety of household and similar electrical appliances ? particular requirements ? range hoods |
IS 302 (Part 2/Sec 31): 2009 |
| 155 |
BIS For Safety of household and similar electrical appliances ? particular requirements ? toasters, grills, roasters and similar appliances |
IS 302 (Part 2/Sec 9): 2009 |
| 156 |
BIS For Air Filters for general ventilation ? Technical specifications requirements and classification system based upon particulate matter efficiency (ePM) |
IS 17570 (Part 1): 2021 ISO 16890-2: 2016 |
| 157 |
BIS For Evaporative Air Coolers (Desert Coolers) |
IS 3315:2019 |
| 158 |
BIS For Diesel Engines ? NOx Reduction Agent AUS 32 |
IS 17042 (Part-1): 2018 |
| 159 |
BIS For Polypropylene (PP) Materials for Moulding and Extrusion |
IS 10951: 2020 |
| 160 |
BIS For Poly Vinyl Chloride (PVC) Homopolymers |
IS 17658:2021 |
| 161 |
BIS For Poly- Laminated aluminium cable wrap |
IS 16012: 2012 |
| 162 |
BIS For Specification for Pressure sensitive adhesive insulating tapes for electrical purposes- Part 3 requirements or individual materials ? Sec 1 plasticized polyvinylchloride tapes with non- Thermosetting adhesive |
IS 7809 (Part3/ Sec1): 1986 |
| 163 |
BIS For Insulating Mats for Electrical Purposes |
IS 15652:2006 |
| 164 |
BIS For Live Working Gloves of Insulating Material |
IS 13774:2021 |
| 165 |
BIS For Switch-socket-outlets (non-interlock type) |
IS 15787: 2008 |
| 166 |
BIS For Bayonet Lamp Holders |
IS 1258: 2005 |
| 167 |
BIS For Cable Trunking and Ducting Systems for Electrical Installations ? Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling |
IS 14927 (Part 2): 2001 |
| 168 |
BIS For Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations |
IS 14772: 2020 |
| 169 |
BIS For Glass beakers |
IS 2619:2018 |
| 170 |
BIS For Laboratory glassware ? Single volume pipettes |
IS 1117:2018 |
| 171 |
BIS For Laboratory glassware ? Narrow-necked boiling flasks |
IS 1381 (Part 1):2003 |
| 172 |
BIS For Laboratory glassware ? One ? Mark volumetric flasks |
IS 915:2012 |
| 173 |
BIS For Laboratory glassware ? Graduated measuring cylinders |
IS 878 :2008 |
| 174 |
BIS For Rubber Gaskets for Pressure Cookers |
IS 7466 :1994 |
| 175 |
BIS For Cycle ? Rubber Tubes (Moulded or Jointed) |
IS 2415 :2015 |
| 176 |
BIS For Cycle and Rickshaw Pneumatic Tyres |
IS 2414:2005 |
| 177 |
BIS For Cabinet hinges |
IS 18297:2023 |
| 178 |
BIS For Double-acting spring hinges |
IS 453:1993 |
| 179 |
BIS For Steel back flap hinges |
IS 3843:1995 |
| 180 |
BIS For Continuous (Piano) hinges |
IS 3818:1992 |
| 181 |
BIS For Parliament hinges |
IS 362:1991 |
| 182 |
BIS For Tee and strap hinges |
IS 206:2010 |
| 183 |
BIS For Non-ferrous metal butt hinges |
IS 205:1992 |
| 184 |
BIS For Steel Butt Hinges |
IS 1341:2018 |
| 185 |
BIS For Stainless steel butt hinges |
IS 12817:2020 |
| 186 |
BIS For Key locks for security equipment |
IS 17566 : 2021 |
| 187 |
BIS For Safe deposit locker cabinets |
IS 5244 : 2020 |
| 188 |
BIS For Safes |
IS 550 (Part 1) : 2014 |
| 189 |
BIS For Textiles ? Polypropylene (PP)/ High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution |
IS 17399 : 2020 |
| 190 |
BIS For Textiles ? High Density Polyethylene (HDPE) Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials |
IS 16703 : 2017 |
| 191 |
BIS For Textiles ? Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement |
IS 16709 : 2017 |
| 192 |
BIS For Textiles ? High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement |
IS 11652 : 2017 |
| 193 |
BIS For Textiles?High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers |
IS 9755 : 2021 |
| 194 |
BIS For Legal Metrology ? Material Measure of length ? Steel tape measures |
IS 1269(Part 2) : 1997 |
| 195 |
BIS For Legal Metrology ? Material Measure of length ? Woven metallic and glass fibre tape measures |
IS 1269(Part 1) : 1997 |
| 196 |
BIS For Mechanically Woven, Double- Twisted, Hexagonal Wire Mesh Gabions, Revet Mattresses and Rock Fall Netting and Other Rock Fall Netting and Other Products for Civil Engineering Purposes (Galvanized Steel Wire or Galvanized Steel Wire with polymer coa |
IS 16014:2018 |
| 197 |
BIS For Galvanized Steel Barbed Wire for Fencing |
IS 278:2009 |
| 198 |
BIS For Braided Nylon Ropes for Mountaineering Purposes |
IS 6590:1972 |
| 199 |
BIS For Wire Ropes Used in Oil Wells and Oil Well Drilling |
IS 4521:2001 |
| 200 |
BIS For Hot Dip Galvanized Stay Strand |
IS 2141:20005 |
| 201 |
BIS For Steel Wire Rope forhaulage |
IS 1856:2005 |
| 202 |
BIS For Stranded steel wire ropes for winding and man ?riding haulages in mines |
IS 1855:2022 |
| 203 |
BIS For Steel Wire Suspension Ropes for Lifts, Elevators and Hoists |
IS 2365 : 2018 |
| 204 |
BIS For Steel Wire Ropes for General Engineering Purposes |
IS 2266 : 2019 |
| 205 |
BIS For Non- metal helmet for Police Force |
IS 9562:1980 |
| 206 |
BIS For Industrial safety helmets |
IS 2925:1984 |
| 207 |
BIS For Non-metal helmet for firemen and civil defence personnel |
IS 2745:1983 |
| 208 |
BIS For Bottled water dispensers |
IS 17681:2022 |
| 209 |
BIS For Door handles for mortice lock (vertical type) |
IS 4992:1975 |
| 210 |
BIS For Door Handles |
IS 208:2020 |
| 211 |
BIS For Rim Latches |
IS 1019:1974 |
| 212 |
BIS For Floor springs (hydraulically regulated) for heavy doors |
IS 6315:1992 |
| 213 |
BIS For Hydraulically Regulated Door Closers |
IS 3564:1995 |
| 214 |
BIS For Door closers, concealed type (hydraulically regulated) |
IS 14912:2001 |
| 215 |
BIS For Door closers (pneumatically regulated) for light doors weighing up to 40 kg |
IS 6343:1982 |
| 216 |
BIS For Square Tins ? 15 Kilograms or litre for Ghee, Vanaspati, Edible Oils and Bakery |
IS 10325:2000 |
| 217 |
BIS For Square Tins for Solid Products |
IS 916:2000 |
| 218 |
BIS For Bitumen Drums |
IS 3575:1993 |
| 219 |
BIS For Steel Drums (Galvanized and Ungalvanized) |
IS 2552:1989 |
| 220 |
BIS For Drums, Large, Fixed Ends ? Grade |
IS 1783 (Part 2) :2014 |
| 221 |
BIS For Drums Large, Fixed Ends ? Grade A |
IS 1783 (Part 1) :2014 |
| 222 |
BIS For Drums, Large Open Top |
IS 13997:2014 |
| 223 |
BIS For Copper wires for general engineering purposes |
IS 4412:1981 |
| 224 |
BIS For Wrought Copper Tubes for Refrigeration and Air- Conditioning Purpose |
IS 10773:1995 |
| 225 |
BIS For Copper Tubes for plumbing- Specification/p> |
IS 14810: 2000 |
| 226 |
BIS For Solid drawn copper tubes for general engineering purposes |
IS 2501: 1995 |
| 227 |
BIS For Solid drawn copper and copper alloy tubes for condensers and heat exchangers |
IS 1545: 1994 |
| 228 |
BIS For Copper rods and bars for general engineering purposes |
IS 4171:1983 |
| 229 |
BIS For Copper strip for electrical purposes |
IS 1897:2008 |
| 230 |
BIS For Copper Rods and Bars for Electrical Purposes |
IS 613:2000 |
| 231 |
BIS For Copper Wire Rods for Electrical Applications |
IS 12444:2020 |
| 232 |
BIS For Laminated Woven Orchard Protection Covers |
IS 17731 : 2021 |
| 233 |
BIS For Hail Protection Nets for Agriculture and Horticulture Purposes ? Woven Hail Protection Nets |
IS 17730 (Part 2) : 2021 |
| 234 |
BIS For Hail Protection Nets for Agriculture and Horticulture Purposes- Warp Knitted Hail Protection Nets |
IS 17730 (Part 1) : 2021 |
| 235 |
BIS For Flexible Water Storage Tank for Agriculture and Horticulture Purposes |
IS 17729 : 2021 |
| 236 |
BIS For High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System |
IS 17728 : 2021 |
| 237 |
BIS For Plant Support Nets for Agriculture and Horticulture Purposes |
IS 17513 : 2020 |
| 238 |
BIS For Fencing nets for agriculture and horticulture purposes -made from mono filament yarns and combination of tape and mono filament yarns |
IS 17358 (Part 2) : 2020 |
| 239 |
BIS For Fencing nets for agriculture and horticulture purposes ? made from extruded polymer mesh |
IS 17358 (Part 1) : 2020 |
| 240 |
BIS For Harvest nets for agriculture and horticulture purposes |
IS 17357 : 2020 |
| 241 |
BIS For Windshield nets for agriculture and horticulture purpose |
IS 17356 : 2020 |
| 242 |
BIS For Propylene Spun bonded non?woven mulch mat for agriculture and horticulture applications |
IS 17355 : 2020 |
| 243 |
BIS For High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system |
IS 16627 : 2017 |
| 244 |
BIS For Nylon Knitted seamless gloves for tobacco harvesters |
IS 16390 : 2015 |
| 245 |
BIS For High Density Polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose |
IS 16190 : 2014 |
| 246 |
BIS For Sapling bags for growth of seedling /sapling |
IS 16089 : 2013 |
| 247 |
BIS For High Density Polyethylene (HDPE) woven beds for vermiculture |
IS 15907 : 2010 |
| 248 |
BIS For Jute Agro textiles for Growth of Plants and Suppression of Weeds |
IS 17070 : 2019 |
| 249 |
BIS For Woven Ground covers for Horticulture Application |
IS 16202 : 2014 |
| 250 |
BIS For Insect nets for Agriculture and Horticulture purpose |
IS 16513 : 2016 |
| 251 |
BIS For Polypropylene Spun Bonded Non?Woven Crop Cover and Fruit Skirting Bags for Agriculture and Horticulture Applications |
IS 16718 : 2021 |
| 252 |
BIS For Bed sheet and Pillow Cover |
IS 17630 : 2021 |
| 253 |
BIS For Dental Bib or Napkins |
IS 17354 : 2020 |
| 254 |
BIS For Shoe covers |
IS 17349 : 2020 |
| 255 |
BIS For Reusable Sanitary pad/ Sanitary Napkin/ Period Panties |
IS 17514 : 2021 |
| 256 |
BIS For Disposable baby diaper |
IS 17509 : 2021 |
| 257 |
BIS For Sanitary napkins |
IS 5405 : 2019 |
| 258 |
BIS For Self- Contained Drinking Water Coolers ? Energy Consumption and Performance |
IS 1475 (Part 1) : 2001 |
| 259 |
BIS For Short ? Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets |
IS 2403 :2014 / ISO 606 : 2004 |
| 260 |
BIS For Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications |
IS 7902:2001 |
| 261 |
BIS For Corrugated Aluminium Sheet |
IS 1254:2007 |
| 262 |
BIS For Wrought aluminium and aluminium alloys for manufacture of utensils |
IS 21:1992 |
| 263 |
BIS For Wrought Aluminium Wire for Electrical Purposes |
IS 2067:1975 |
| 264 |
BIS For Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes |
IS 1285:2002 |
| 265 |
BIS For Aluminium composite panel |
IS 17682:2021 |
| 266 |
BIS For Aluminium and aluminium alloy foil for pharmaceutical packaging |
IS 16011:2012 |
| 267 |
BIS For Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications |
IS 5082:1998 |
| 268 |
BIS For Wrought aluminium and aluminium alloy rivet stock for general engineering purposes |
IS 740:1977 |
| 269 |
BIS For Wrought aluminium and aluminium alloy wire for general engineering purposes |
IS 739:1992 |
| 270 |
BIS For Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes |
IS 737:2008 |
| 271 |
BIS For Wrought aluminium and aluminium alloy plate for general engineering purposes |
IS 736:1986 |
| 272 |
BIS For Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes |
IS 734:1975 |
| 273 |
BIS For Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) |
IS 733:1983 |
| 274 |
BIS For EC Grade Aluminium Rod produced by Continuous Casting and Rolling |
IS 5484:1997 |
| 275 |
BIS For Aluminium alloy tube for irrigation purposes ? extruded tube |
IS 7092 (Part 2):1987 |
| 276 |
BIS For Aluminium alloy tubes for irrigation purposes -welded tubes |
IS 7092 (Part 1):1992 |
| 277 |
BIS For Stainless steel tubes for the food and beverage industry |
IS 6913 : 1973 |
| 278 |
BIS For Steel Pipe Flanges |
IS 6392 : 2020 |
| 279 |
BIS For High Strength deformed stainless steel bars and wires for concrete reinforcement |
IS 16651 : 2017 |
| 280 |
BIS For Bar or wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials |
IS 15155 : 2020 |
| 281 |
BIS For Flux Cored Solder Wire |
IS 1921: 2005 |
| 282 |
BIS For Structural plywood ? Specification |
IS 10701 : 2012 |
| 283 |
BIS For Plywood for concrete shuttering works ? Specification |
IS 4990 : 2011 |
| 284 |
BIS For Wooden Flush Door Shutters (Solid core type) ? Particle board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels |
IS 2202 (Part 2): 2022 |
| 285 |
BIS For Wooden flush door shutters (cellular and hollow core type) ? Plywood face panels |
IS 2191 (Part 1): 2022 |
| 286 |
BIS For Wooden flush door shutters (cellular and hollow core type) ? Particle board and hardboard face panels |
IS 2191 (Part 2): 2022 |
| 287 |
BIS For Veneered decorative plywood |
IS 1328 : 1996 |
| 288 |
BIS For Fire retardant plywood |
IS 5509 : 2021 |
| 289 |
BIS For Marine plywood |
IS 710 : 2010 |
| 290 |
BIS For Wooden flush door shutters (solid core type) ? Plywood face panels |
IS 2202 (Part 1) : 1999 |
| 291 |
BIS For Plywood for general purposes |
IS 303 : 1989 |
| 292 |
BIS For Nickel Powder |
IS 7506:1987 |
| 293 |
BIS For Copper |
IS 191:2007 |
| 294 |
BIS For Aluminum ingots billets and wire bars (EC GRADE) |
IS 4026 : 2023 |
| 295 |
BIS For Primary aluminium ingots for remelting for general engineering purpose |
IS 2590 : 1987 |
| 296 |
BIS For Aluminum alloy ingots for remelting for general engineering purpose |
IS 6754:1972 |
| 297 |
BIS For High purity primary aluminum ingot for remelting for special applications |
IS 11890 : 1987 |
| 298 |
BIS For Cast aluminium and its alloys ? Ingots and castings for general engineering purposes |
IS 617:1994 |
| 299 |
BIS For Thermosetting Insulated, Fire Survival Cables for working voltage upto and including 1100V AC and 1500V DC |
IS 17505(Part 1): 2021 |
| 300 |
BIS For Electric Cable for Photovoltic Systems for rated voltage 1500V DC |
IS 17293:2020 |
| 301 |
BIS For Vertically cast ? iron pressure pipes for water, gas and sewage |
IS 1537:1976 |
| 302 |
BIS For Grey iron castings |
IS 210:2009 |
| 303 |
BIS For Cast iron single faced thimble mounted sluice gates |
IS 13349:1992 |
| 304 |
BIS For Malleable cast iron pipe fittings |
IS 1879:2010 |
| 305 |
BIS For Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipelines socket and spigot series |
IS 1729:2002 |
| 306 |
BIS For Cast iron man hole covers and frames |
IS 1726:1991 |
| 307 |
BIS For Veneered particle boards |
IS 3097:2006 |
| 308 |
BIS For Medium density fibre boards for general purpose |
IS 12406:2021 |
| 309 |
BIS For Particle boards of wood and other lignocellulosic materials (medium density) for general purpose |
IS 3087:2005 |
| 310 |
BIS For Prelaminated particle boards from wood and other Lignocellulosic material |
IS 12823:2015 |
| 311 |
BIS For Block Boards |
IS 1659:2004 |
| 312 |
BIS For Electric Ceiling Type Fans |
IS 374:2019 |
| 313 |
BIS For Wheeled Fire Extinguishers |
IS 16018:2012 |
| 314 |
BIS For Portable Fire Extinguishers |
IS 15683 : 2018 |
| 315 |
BIS For Domestic Gas Stoves for use with Piped Natural Gas (PNG) |
IS 17153:2019 |
| 316 |
BIS For Aluminium cans for beverages |
IS 14407:1996 |
| 317 |
BIS For Round Open Top Sanitary Cans for Foods and Drinks ? Tinplate |
IS 9396 (Part 1) : 1987 |
| 318 |
BIS For Stainless Steel Sinks for Domestic Purposes |
IS 13983:1994 |
| 319 |
BIS For Wrought Aluminium Utensils |
IS 1660:2009 |
| 320 |
BIS For Stainless Steel Cookware |
IS 14756 : 2022 |
| 321 |
BIS For High Strength Structural Nuts |
IS 6623 : 2004 |
| 322 |
BIS For Stainless steel Tower Bolts |
IS 15833 : 2009 |
| 323 |
BIS For Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes |
IS 1284 : 1975 |
| 324 |
BIS For Sliding locking bolts for use with padlocks |
IS 7534: 1985 |
| 325 |
BIS For Mild steel sliding door bolts for use with padlocks |
IS 281 : 2009 |
| 326 |
BIS For Non-ferrous metal sliding door bolts (aldrops) for use with padlocks |
IS 2681 : 1993 |
| 327 |
BIS For Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks |
IS 15834 : 2022 |
| 328 |
BIS For Tower Bolts- Ferrous metals |
IS 204 (Part 1): 1991 |
| 329 |
BIS For Tower Bolts- Non-ferrous metal |
IS 204 (Part 2): 1992 |
| 330 |
BIS For High Strength Structural Bolts |
IS 3757 : 1985 |
| 331 |
BIS For Fasteners ? Threaded Steel Fasteners ? Hexagon Head Transmission Tower Bolts |
IS 12427 : 2001 |
| 332 |
BIS For Fasteners ? Threaded Steel Fastener ? Step Bolts for Steel Structures |
IS 10238:2001 |
| 333 |
BIS For Flush Bolts |
IS 5187: 1972 |
| 334 |
BIS For Indicating Bolts for use in public baths and lavatories |
IS 4621:1975 |
| 335 |
BIS For Hexagon Head Bolts, Screws and Nuts of Product Grades A and B ? Hexagon Head Screws (Size Range M 1.6 to M 64) |
IS 1364 (Part 2) :2018 |
| 336 |
BIS For Hexagon Head Bolts, Screws and Nuts of product Grades A and B ? Hexagon Head Bolts (Size Range M 1.6 To M 64) |
IS 1364 (Part 1) :2018 |
| 337 |
BIS For Hexagon Head Bolts, Screws and Nuts of product Grade C ? Hexagon Nuts (Size Range M5 to M64) |
IS 1363 (Part 3) :2018 |
| 338 |
BIS For Hexagon Head Screw (Size ranges from M 5 to 64) |
IS 1363 (Part 2) :2018 |
| 339 |
BIS For Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64) |
IS 1363 (Part 1) :2019 |
| 340 |
BIS For Resin treated compressed wood laminates (compregs) ? For general purposes |
IS 3513 (Part 3) : 1989 |
| 341 |
BIS For Resin treated compressed wood laminates (compregs) ? For chemical purposes |
IS 3513 (Part 2) : 1989 |
| 342 |
BIS For Resin treated compressed wood laminates (compregs) ? For electrical purposes |
|
| 343 |
BIS For Resin treated compressed wood laminates |
IS 3513 (Part 1) : 1989 |
| 344 |
BIS For Insulated Container for Food Storage |
IS 17569: 2021 |
| 345 |
BIS For Domestic Stainless steel vacuum flask/bottle |
IS 17526 : 2021 |
| 346 |
BIS For Insulated Flask for Domestic Use |
IS 17790 : 2022 |
| 347 |
BIS For A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S |
IS 16444 Part 2 |
| 348 |
BIS For A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2 |
IS 16444 Part 1 |
| 349 |
BIS For Welding rode and bare electrodes for gas shielded arc welding of structural steel |
IS 6419 : 1996 |
| 350 |
BIS For Covered electrodes for manual metal arc welding of carbon and carbon manganese steel |
IS 814 : 2004 |
| 351 |
BIS For Potable Water Bottles (Copper, Stainless Steel, Aluminum) |
IS 17803: 2022 |
| 352 |
BIS For Utility Lighters ? Safety Specifications |
IS/ISO 22702:2018 |
| 353 |
BIS For Lighters- Safety Specifications |
IS/ISO 9994:2018 |
| 354 |
BIS For Upholstered composites used for non-domestic furniture |
IS 15768 : 2008 |
| 355 |
BIS For Water-proof multipurpose rain poncho |
IS 17286 : 2019 |
| 356 |
BIS For Bullet resistant jackets |
IS 17051 : 2018 |
| 357 |
BIS For Pouch for ammunition and grenades made of disruptive pattern nylon-66 |
IS 16726 : 2018 |
| 358 |
BIS For Tactical 3 point sling |
IS 16725 : 2018 |
| 359 |
BIS For Protective Clothing for use in welding and allied processes |
IS 16655 : 2017 |
| 360 |
BIS For High visibility Warning Clothes |
IS 15809 : 2017 |
| 361 |
BIS For Clothing made of limited flame spread materials and material assemblies affording protection against heat and flame |
IS 15742 : 2007 |
| 362 |
BIS For Protective clothing for industrial workers exposed to heat |
IS 15748 : 2022 |
| 363 |
BIS For Protective gloves for firefighters |
IS 16874 : 2018 |
| 364 |
BIS For Protective clothing for firefighters |
IS 16890 : 2018 |
| 365 |
BIS For Curtains and Drapes |
IS 15741 : 2007 |
| 366 |
BIS For Geosynthetics ? Synthetic Polymer RopeGabions for Coastal and Waterways Protection ? Specification |
IS 17880 :2022 |
| 367 |
BIS For Geocells |
IS 17483 (Part 2): 2020 |
| 368 |
BIS For Geocells |
IS 17483 (Part 1): 2020 |
| 369 |
BIS For Reinforced HDPE membrane for effluents and chemical resistance lining |
IS 17374:2020 |
| 370 |
BIS For Geogrids used in reinforced soil retaining structures |
IS 17373:2020 |
| 371 |
BIS For Polymeric strip or geostrip used as soil reinforcement in retaining structures |
IS 17372:2020 |
| 372 |
BIS For Geogrids for flexible pavements |
IS 17371:2020 |
| 373 |
BIS For Geotextiles for permanent erosion control in hard armor systems |
IS 16392:2015 |
| 374 |
BIS For Geotextiles used as protection (or cushioning) materials |
IS 16090:2013 |
| 375 |
BIS For High Density Polyethylene (HDPE) Geomembranes for lining |
IS 16352 : 2020 |
| 376 |
BIS For Geotextiles used in Sub-grade Stabilisation in pavement structures |
IS 16362 : 2020 |
| 377 |
BIS For Geotextiles used in Subsurface Drainage Application |
IS 16393 : 2015 |
| 378 |
BIS For Geotextiles used in sub-grade separation in pavement structures |
IS 16391 : 2015 |
| 379 |
BIS For Open Weave Coir Bhoovastra |
IS 15869 : 2020 |
| 380 |
BIS For Jute Geotextiles |
IS 14715 (Part 2): 2016 |
| 381 |
BIS For Jute Geotextiles |
IS 14715 (Part 1): 2016 |
| 382 |
BIS For Polypropylene Multifilament woven geobags |
IS 16654: 2017 |
| 383 |
BIS For Needle punched non-woven geobags |
IS 16653 : 2017 |
| 384 |
BIS For Poly Vinyl Chloride (PVC) Geomembranes |
IS 15909 : 2020 |
| 385 |
BIS For Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining |
IS 15351 : 2015 |
| 386 |
BIS For Viscose Staple Fibres |
IS 17266:2019 |
| 387 |
BIS For Jute bags for packing up to 30 Kg foodgrains |
IS 16372:2015 |
| 388 |
BIS For Light weight jute sacking bags for packing 50 Kg foodgrains |
IS 16186:2014 |
| 389 |
BIS For Jute bags for packing 50 Kg sugar |
IS 15138:2010 |
| 390 |
BIS For Jute bags for packing 50 Kg foodgrains |
IS 12650:2018 |
| 391 |
BIS For B-twill Jute bags for packing foodgrains |
IS 2566:1993 |
| 392 |
BIS For A- twill Jute Bag |
IS 1943:1995 |
| 393 |
BIS For Reverse Osmosis Based Point of Use Water Treatment System for Drinking Purposes |
IS 16240 : 2023 |
| 394 |
BIS For Household Zig-Zag Sewing Machine Head |
IS 15449 : Part 1 : 2004 |
| 395 |
BIS For Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel |
IS 15769:2008 |
| 396 |
BIS For Hubless centrifugally cast (Spun) iron pipes, fittings and accessories ? Spigot series |
IS 15905: 2011 |
| 397 |
BIS For Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories |
IS 3989: 2009 |
| 398 |
BIS For Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage |
IS 1536: 2001 |
| 399 |
BIS For Freezers |
IS 7872: 2018 |
| 400 |
BIS For Household Refrigerating Appliances- Characteristics and Test Methods part-1 General Requirements |
IS 17550 (Part 1): 2021 |
| 401 |
BIS For Helmet for riders of Two Wheeler Motor Vehicles |
IS 4151: 2015 |
| 402 |
BIS For Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced Shank |
IS 4296 (Part 3):2016 |
| 403 |
BIS For Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced Shank |
IS 4296 (Part 2):2016 |
| 404 |
BIS For Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank |
IS 4296 (Part 1):2016 |
| 405 |
BIS For Personal protective equipment ? Part 4 Occupational Footwear |
IS 15298 (Part 4) : 2017 |
| 406 |
BIS For Personal protective equipment ? Part 3 Protective Footwear |
IS 15298 ( Part 3) : 2019 |
| 407 |
BIS For Personal protective equipment ? Part 2 Safety Footwear |
IS 15298 (Part 2): 2016 |
| 408 |
BIS For Shoes for General Purpose |
IS 17043 (Part-2): 2024 |
| 409 |
BIS For Shoes for Services |
IS 17043 (Part-1): 2024 |
| 410 |
BIS For Antiriot shoes |
IS 17037: 2018 |
| 411 |
BIS For High ankle tactical boots with PU ? Rubber sole |
IS 17012: 2018 |
| 412 |
BIS For Sports Footwear for Professional Sports Footwear |
IS 15844(Part 3): 2024 |
| 413 |
BIS For Sports Footwear for Performance Sports Footwear |
IS 15844(Part-2): 2023 |
| 414 |
BIS For Sports Footwear for General Purpose |
IS 15844(Part-1): 2023 |
| 415 |
BIS For Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole |
IS 14544: 1998 |
| 416 |
BIS For Leather safety footwear having direct moulded rubber sole |
IS 11226: 1993 |
| 417 |
BIS For Safety Rubber Canvas Boots for Miners |
IS 3976: 2018 |
| 418 |
BIS For Canvas Boots Rubber Sole |
IS 3736: 1995 |
| 419 |
BIS For Canvas Shoes Rubber Sole |
IS 3735: 1996 |
| 420 |
BIS For Leather safety boots and shoes for heavy metal industries |
IS 1989 (Part.2): 1986 |
| 421 |
BIS For Leather safety boots and shoes for miners |
IS 1989 (Part 1): 1986 |
| 422 |
BIS For Footwear for men and women for municipal scavenging work |
IS 16994: 2018 |
| 423 |
BIS For Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use |
IS 16645: 2018 |
| 424 |
BIS For Unlined moulded rubber boots |
IS 13995: 1995 |
| 425 |
BIS For Polyurethane sole, semirigid |
IS 13893: 1994 |
| 426 |
BIS For Polyvinyl chloride(PVC) industrial boots |
IS 12254: 1993 |
| 427 |
BIS For Rubber Hawai Chappal |
IS 10702: 1992 |
| 428 |
BIS For PVC sandal |
IS 6721: 1972 |
| 429 |
BIS For Solid PVC soles and heels |
IS 6719: 1972 |
| 430 |
BIS For Rubber microcellular sheets for soles and heels |
IS 6664: 1992 |
| 431 |
BIS For Moulded solid rubber soles and heels |
IS 5676: 1995 |
| 432 |
BIS For All rubber gum boots and ankle boots |
IS 5557 (Part 2): 2018 |
| 433 |
BIS For Industrial and protective rubber knee and ankle boots |
IS 5557: 2004 |
| 434 |
BIS For Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and Buses |
IS: 9438 |
| 435 |
BIS For Performance Requirements and Methods of Tests for Wheels for Passenger Cars |
IS: 9436 |
| 436 |
BIS For Spoke Wheel Rims Method of Tests and Requirements |
|
| 437 |
BIS For Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3 |
IS: 16192 (Part 3) |
| 438 |
BIS For Sheet Metal Wheel Rims Method of Tests and Requirements |
|
| 439 |
BIS For Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2 |
IS: 16192 (Part 2) |
| 440 |
BIS For Light Alloy Wheel Rims Method of Tests and Requirements |
|
| 441 |
BIS For Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1 |
IS: 16192 (Part 1) |
| 442 |
BIS For Compounded Feeds for Cattle |
IS 2052 : 2009 |
| 443 |
BIS For Plain Copier Paper |
IS 14490:2018 |
| 444 |
BIS For Retro-reflective Devices |
IS/ISO 6742-2:2015 |
| 445 |
BIS For Butterfly valves for general purpose |
IS 13095:1991 |
| 446 |
BIS For Textiles ?High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling Sand |
IS 14252:2015 |
| 447 |
BIS For Textiles ?High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram Sugar |
IS 14968:2015 |
| 448 |
BIS For Textiles ?High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram Foodgrains |
IS 16208:2015 |
| 449 |
BIS For Textiles ?High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram Foodgrains |
IS 14887:2014 |
| 450 |
BIS For Safety Glass -Specification Part 2 For Road Transport . |
IS 2553 (Part 2):2019 |
| 451 |
BIS For Safety Glass -Specification Part 1 Architectural, Building and General uses. |
IS 2553 (Part 1):2018 |
| 452 |
BIS For Flat Transparent Sheet Glass. |
IS 2835 : 1987 |
| 453 |
BIS For Safety of Electric Toys. |
IS 15644: 2006 |
| 454 |
BIS For Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children?s Products. |
IS 9873 (Part 9) : 2017 |
| 455 |
BIS For Safety of Toys Part 7 Requirements and Test Methods for Finger Paints. |
IS 9873 (Part 7) : 2017 |
| 456 |
BIS For Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use. |
IS 9873 (Part 4) : 2017 |
| 457 |
BIS For Safety Requirements for Toys Part 3 Migration of Certain Elements. |
IS 9873 (Part 3) : 2017 |
| 458 |
BIS For Safety of Toys Part 2 Flammability. |
IS 9873 (Part 2) : 2017 |
| 459 |
BIS For Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties. |
IS 9873 (Part 1) : 2018 |
| 460 |
BIS For Aluminium and Aluminium Alloy Bare Foil for Food Packaging |
IS 15392 |
| 461 |
BIS For Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application. |
IS 9573(Part 2):2017 |
| 462 |
BIS For Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application |
IS 9573(Part 1):2017 |
| 463 |
BIS For Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V ? Specification |
IS 17048 : 2018 |
| 464 |
BIS For Specification for Shot Firing Cables (for use other than in shafts) |
IS 5950 : 1984 |
| 465 |
BIS For Specification for Flexible Cables for Miner?s Cap-Lamps |
IS 2593 : 1984 |
| 466 |
BIS For Elastomer Insulated Flexible Cables for Use in Mines ? Specification |
IS 14494 : 2019 |
| 467 |
BIS For Welding Cables ? Specification |
IS 9857 : 1990 |
| 468 |
BIS For Specification for Thermocouple Compensating Cables |
IS 8784 : 1987 |
| 469 |
BIS For Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV |
IS 9968 (Part 2) : 2002 |
| 470 |
BIS For Aerial Bunched Cables ? For Working Voltages Up to and Including 1100 Volts ? Specification |
IS 14255 : 1995 |
| 471 |
BIS For Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV |
IS 7098 (Part 3) : 1993 |
| 472 |
BIS For Crosslinked polyethylene insulated Thermoplastics sheathed cables ? Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV |
IS 7098 (Part 2) : 2011 |
| 473 |
BIS For Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V |
IS 7098 (Part 1) : 1988 |
| 474 |
BIS For Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kV |
IS 1554(Part 2) : 1988 |
| 475 |
BIS For Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V |
IS 1554(Part 1) : 1988 |
| 476 |
BIS For Domestic Pressure Cooker |
IS 2347:2017 |
| 477 |
BIS For Transparent Float Glass |
IS 14900: 2018 |
| 478 |
BIS For Domestic Gas Stoves for use with Liquefied Petroleum Gases |
IS 4246: 2002 |
| 479 |
BIS For Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2) |
IS 15884:2010 |
| 480 |
BIS For Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes |
IS 1293 : 2005 |
| 481 |
BIS For Hermetic Compressors-Specification |
|
| 482 |
BIS For Hermetic compressor |
IS 10617:2018 |
| 483 |
BIS For Finned type Heat Exchanger for Room Air Conditioner |
IS 11329:2018 |
| 484 |
BIS For Ducted and Package Air Conditioners |
IS 8148:2018 |
| 485 |
BIS For Room Air Conditioners- Specification Part 2 Split Air Conditioners |
IS 1391 (Part-2): 2018 |
| 486 |
BIS For Room Air Conditioners- Specification Part 1 Unitary Air Conditioners |
IS 1391 (Part-1): 2017 |
| 487 |
BIS For Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas |
IS 15558 |
| 488 |
BIS For Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer |
IS 4250 |
| 489 |
BIS For Hand-held Blender |
IS 302 (Part 2/ Section 14) |
| 490 |
BIS For Hydrogenated Rice Bran Fatty Acids |
IS 12361 :1988 |
| 491 |
BIS For Rubberseed Fatty Acids |
IS 12124 : 1987 |
| 492 |
BIS For Coconut Fatty Acids |
IS 12069 : 1987 |
| 493 |
BIS For Rice Bran Fatty Acids |
IS 12068 :1987 |
| 494 |
BIS For Palm Fatty Acids |
IS 12067: 1987 |
| 495 |
BIS For Acid Oil |
IS 12029 : 1986 |
| 496 |
BIS For Lauric Acid |
IS 10931 : 1984 |
| 497 |
BIS For 1,3 Phenylenediamine |
IS 17450 : 2020 |
| 498 |
BIS For Vinyl Chloride Monomer |
IS 17442:2020 |
| 499 |
BIS For Polyurethanes |
IS 17397 (Part 1) : 2020/ISO 16365-1 : 2014 |
| 500 |
BIS For Polycarbonate |
IS 14434:1998 |
| 501 |
BIS For p-Xylene |
IS 17370:2020 |
| 502 |
BIS For Ethylene Dichloride |
IS 869:2020 |
| 503 |
BIS For Acrylonitrile Butadiene Styrene (ABS) |
IS 17077 :2019/ISO 19062-1 : 2015 |
| 504 |
BIS For Red Phosphorus |
IS 2012:2006 |
| 505 |
BIS For Methylene Chloride (Dichloromethane) |
IS 4566:2020 |
| 506 |
BIS For 3(N, N-DiEthyl) Aminophenol |
IS 7686:2020 |
| 507 |
BIS For Ethylene Vinyl Acetate (EVA) Copolymers |
IS 13601:1993 |
| 508 |
BIS For Linear Alkyl Benzene |
IS 12795:2020 |
| 509 |
BIS For Synthetic Micro-Fibres for use in Cement Based Matrix |
IS 16481:2016 |
| 510 |
BIS For Styrene-Butadiene Rubber Latex |
IS 11356:2020 |
| 511 |
BIS For (iii) High Density Polyethylene (HDPE) |
|
| 512 |
BIS For (ii) Linear Low-Density Polyethylene (LLDPE) |
|
| 513 |
BIS For (i) Low Density Polyethylene (LDPE) |
|
| 514 |
BIS For Polyethylene Material for moulding and extrusion |
IS 7328:2020 |
| 515 |
BIS For Polyester Staple Fibres (PSF) |
IS 17263:2019 |
| 516 |
BIS For Polyester Partially Oriented Yarn (POY) |
IS 17262:2019 |
| 517 |
BIS For Polyester Industrial Yarn (IDY) |
IS 17264:2019 |
| 518 |
BIS For Polyester Continuous Filament Fully Drawn Yarn (FDY) |
IS 17261:2019 |
| 519 |
BIS For 100 Percent. Polyester Spun Grey and White Yarn (PSY) |
IS 17265:2019 |
| 520 |
BIS For Acrylonitrile |
IS 12540:1988 |
| 521 |
BIS For Maleic Anhydride, Technical |
IS 5149:2020 |
| 522 |
BIS For Styrene (Vinyl Benzene) |
IS 4105:2020 |
| 523 |
BIS For Vinyl Acetate Monomer |
IS 12345:1988 |
| 524 |
BIS For Ethyl Acrylate |
IS 14708:1999 |
| 525 |
BIS For Methyl Acrylate |
IS 14707: 1999 |
| 526 |
BIS For Terephthalic Acid |
IS 15030:2001 |
| 527 |
BIS For Toluene |
IS 537:2011 |
| 528 |
BIS For Ethylene Glycol |
IS 5295:1985 |
| 529 |
BIS For Ether |
IS 336:1973 |
| 530 |
BIS For n- Butyl Acrylate |
IS 14709:1999 |
| 531 |
BIS For Sodium Tripolyphosphate, Anhydrous, Technical |
IS 6100:1984 |
| 532 |
BIS For Sodium Formaldehyde Sulphoxylate |
IS 4505:2015 |
| 533 |
BIS For Precipitated Barium for Ceramic and Glass Industry |
IS 12928:1990 |
| 534 |
BIS For Precipitated Barium Carbonate, Technical |
IS 3205:1984 |
| 535 |
BIS For Stabilized Hydrogen Peroxide |
IS 2080:2021 |
| 536 |
BIS For Phosphorous Oxychloride, Technical |
IS 11657:1986 |
| 537 |
BIS For Phosphorous Pentachloride, Technical |
IS 11744:1986 |
| 538 |
BIS For Phosphorous Trichloride, pure and Analytical Reagent |
IS 4581:1978 |
| 539 |
BIS For Acetone |
IS 170:2004 |
| 540 |
BIS For Potassium Carbonate, Anhydrous |
IS 7129:1992 |
| 541 |
BIS For Sodium Sulphide, Technical |
IS 297:2001 |
| 542 |
BIS For Morpholine |
IS 12084: 2018 |
| 543 |
BIS For Beta Picoline |
IS 16112:2013 |
| 544 |
BIS For Gamma Picoline |
IS 16113:2013 |
| 545 |
BIS For Pyridine |
IS 8058:2018 |
| 546 |
BIS For Specification for Phthalic Anhydride, Technical |
IS 5158: 1987 |
| 547 |
BIS For Methanol |
IS 517 |
| 548 |
BIS For Aniline |
IS 2833 |
| 549 |
BIS For Acetic Acid |
IS 695 |
| 550 |
BIS For Poly Aluminium Chloride |
IS 15573 |
| 551 |
BIS For Boric Acid ? Specification |
IS 10116 : 2015 |
| 552 |
BIS For Caustic Soda -Specification |
IS 252:2013 |
| 553 |
BIS For Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation |
IS 13585 Part 1 |
| 554 |
BIS For Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V |
IS 13340 |
| 555 |
BIS For A.C. motor capacitors |
IS 2993 |
| 556 |
BIS For Energy Efficient Induction Motors-Three Phase Squirrel Cage |
IS 12615 |
| 557 |
BIS For Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed |
IS 1180 (Part 1) |
| 558 |
BIS For Specification for Malleable iron shots and grits for use in foundries |
IS 9139:1979 |
| 559 |
BIS For Steel tubes used for water-wells (upto 200 mm dia) |
IS 4270:2001 |
| 560 |
BIS For Steel Tubes, Tubulars and Other Wrought Steel Fittings ? Part 1 : Steel Tubes |
IS 1239 (Part 1):2014 |
| 561 |
BIS For Steel tubes for structural purposes |
IS 1161:2014 |
| 562 |
BIS For Ductile iron fittings for pressure pipes for water, gas and sewage |
IS 9523:2000 |
| 563 |
BIS For Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage |
IS 8329 : 2000 |
| 564 |
BIS For Specification for Ferro Vanadium |
IS 1466: 1985 |
| 565 |
BIS For Ferromolybdenum ? Specification |
IS 1469: 1993 |
| 566 |
BIS For Hot-Dip Zinc ? Aluminium ? Magnesium Alloy Coated Steel Sheets, Plates and Strips |
IS 18513: 2023 |
| 567 |
BIS For Hot- Dip galvanized/ galvannealed Steel Sheet and strips for Automotive Applications |
IS 18385: 2023 |
| 568 |
BIS For Hot-Rolled Steel Strip, Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems |
IS 18384: 2023 |
| 569 |
BIS For Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed NonGrain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel |
IS 18316: 2023 |
| 570 |
BIS For Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips |
IS 17404 : 2020 |
| 571 |
BIS For Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete |
IS 16644: 2018 |
| 572 |
BIS For Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs |
IS 13352: 1992 |
| 573 |
BIS For Thermostat Metal Sheet and Strip |
IS 5478: 1969 |
| 574 |
BIS For Flame And Induction Hardening Steels |
IS 3930: 1994 |
| 575 |
BIS For Cold ? Reduced tinmill products ? Blackplate |
IS/ISO 11951 : 2016 |
| 576 |
BIS For Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services |
IS 14698:1999 |
| 577 |
BIS For Tool Steel Forgings For Metal Forming |
IS 13387: 1992 |
| 578 |
BIS For Quenched And Tempered Alloy Steel Forgings For Pressure Vessels |
IS 12145: 1987 |
| 579 |
BIS For Forged/Rolled CTC Segments |
IS 8748: 1978 |
| 580 |
BIS For Steels For Die Blocks For Drop Forging |
IS 5518: 1996 |
| 581 |
BIS For Case Hardening Steels |
IS 4432: 1988 |
| 582 |
BIS For Carbon And Carbon- Manganese Free- Cutting Steels |
IS 4431: 1978 |
| 583 |
BIS For Ferromanganese ? Specification |
IS 1171: 2011 |
| 584 |
BIS For Structural Steel (Ordinary Quality) |
IS 15911:2010 |
| 585 |
BIS For Silicomanganese ? Specification |
IS 1470: 2013 |
| 586 |
BIS For Trapezoidal Steel Wire For Springs Washers |
IS 12262:1988 |
| 587 |
BIS For Mild steel wire for cotter pins |
IS 10794: 1984 |
| 588 |
BIS For Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling |
IS 9485: 1980 |
| 589 |
BIS For Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs |
IS 9442: 1980 |
| 590 |
BIS For Plates For Galvanizing Pots |
IS 8917: 1978 |
| 591 |
BIS For Steel Wire For Reeds |
IS 8566: 1977 |
| 592 |
BIS For Heald Wire |
IS 8565: 1977 |
| 593 |
BIS For Steel Wire For Nipples For Spokes |
IS 8564: 1977 |
| 594 |
BIS For Half Round Mild Steel Wire For The Manufacture of Split Pins |
IS 8563: 1977 |
| 595 |
BIS For Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires |
IS 8510 (PartIII): 1977 |
| 596 |
BIS For Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires |
IS 8510 (Part II): 1977 |
| 597 |
BIS For Steel For Spring Washers |
IS 4072: 1975 |
| 598 |
BIS For Mild Steel Rivet Bars For Ship Building |
IS 3298: 1981 |
| 599 |
BIS For Hard Drawn Steel Wire For Upholstery Springs |
IS 2589: 1975 |
| 600 |
BIS For Steel Billets,Bars And Sections For Boilers |
IS 2100: 1970 |
| 601 |
BIS For Expanded Metal Steel Sheets For General Purposes |
IS 412:1975 |
| 602 |
BIS For Cold-reduced Electrolytic Chromium/Chromium oxide ? coated steel |
IS 12591:2018 |
| 603 |
BIS For Cold-reduced Electrolytic Tin Plate |
IS 1993 : 2018 |
| 604 |
BIS For Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire |
IS 4454 (Part 4): 2001 |
| 605 |
BIS For Chrome molybdenum steel bars and rods for aircraft purposes |
IS 963: 1958 |
| 606 |
BIS For Soft Magnetic Iron Rods, Bars Flats and Sections |
IS 11947:1987 |
| 607 |
BIS For Soft Magnetic Iron Strips |
IS 11946:1987 |
| 608 |
BIS For Ferrochromium ? Specification |
IS 1170: 1992 |
| 609 |
BIS For Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement |
IS 1566:1982 |
| 610 |
BIS For 18 Percent Nickel Maraging Steel Bars and Rods |
IS 14652:1999 |
| 611 |
BIS For Alloys Used in Electrical Resistance Metallic Heating Elements |
IS 12045:1987 |
| 612 |
BIS For Steels For Piston Pins (Gudgeon Pins) |
IS 11952:1986 |
| 613 |
BIS For Heat Resisting Steels |
IS 9516:1980 |
| 614 |
BIS For Steels for Pneumatic Tools |
IS 5651:1987 |
| 615 |
BIS For Steels for cold heading/cold extrusion applications ? specification Part 2 Stainless steel |
IS 11169 (Part 2): 1989 |
| 616 |
BIS For Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates. |
IS 10632 (Part 3):1983 |
| 617 |
BIS For Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire. |
IS 10632 (Part 2):1983 |
| 618 |
BIS For Stainless Steel for welding electrode core wire |
IS 10631:1983 |
| 619 |
BIS For Cold-Rolled Stainless Steel Strips for Razor Blades |
IS 9294:1979 |
| 620 |
BIS For Stainless Steel Blooms Billets And Slabs For Forging |
IS 6529:1996 |
| 621 |
BIS For Specification for High Tensile Steel Bars used in Pre-stressed Concrete |
IS 2090:1983 |
| 622 |
BIS For Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry |
IS 4882: 1979 |
| 623 |
BIS For Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification |
IS 14650:1999 |
| 624 |
BIS For Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement ? Specification |
IS 12594: 1988 |
| 625 |
BIS For Steels for High Temperature Bolting Applications ? Specification |
IS 14331:1995 |
| 626 |
BIS For Heat-Treated Steels Alloy and Free-Cutting Steels ? Ball and Roller Bearing Steels. |
IS 17111: 2019 (ISO 683- 17: 2014) |
| 627 |
BIS For Specification for Steel Wire for Needles. |
IS 9962: 1981 |
| 628 |
BIS For Specification for Cold rolled steel strips for carbon steel razor blades. |
IS 9476: 1980 |
| 629 |
BIS For Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes ? Specification |
IS 8952: 1995 |
| 630 |
BIS For Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification |
IS 8951: 2001 |
| 631 |
BIS For Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications ? Specification. |
IS 8052: 2006 |
| 632 |
BIS For Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets. |
IS 7557: 1982 |
| 633 |
BIS For Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes. |
IS 7226: 1974 |
| 634 |
BIS For Specification for Steel For Electrically welded round Link Chains. |
IS 6967: 1973 |
| 635 |
BIS For Specification for Steel Wire for spokes. |
IS 6902: 1973 |
| 636 |
BIS For Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification |
IS 4398: 1994 |
| 637 |
BIS For Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification. |
IS 4397: 1999 |
| 638 |
BIS For Specification for Steel Wire for Staples, Pins And Clips. |
IS 4224: 1972 |
| 639 |
BIS For Specification for Steel Wire for Umbrella Ribs . |
IS 4223: 1975 |
| 640 |
BIS For Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification. |
IS 3885-Part- 2: 1992 |
| 641 |
BIS For Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections ? Specification. |
IS 3885-Part-1: 1992 |
| 642 |
BIS For Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension. |
IS 3431: 1982 |
| 643 |
BIS For Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) ? Specification . |
IS 3195: 1992 |
| 644 |
BIS For Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process). |
IS 2255: 1977 |
| 645 |
BIS For Specification for Cold ? rolled Steel Strips For Springs. |
IS 2507: 1975 |
| 646 |
BIS For Specification for Carbon Steel Wire for the Manufacture of Wood Screws |
IS 1812: 1982 |
| 647 |
BIS For Specification for Mild Steel Wire, Cold Heading Quality |
IS 1673: 1984 |
| 648 |
BIS For Steel Rivet Bars (medium And High Tensile) ? For Structural Purposes |
IS 1148: 2009 |
| 649 |
BIS For Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) ? Specification |
IS 2831 : 2012 |
| 650 |
BIS For Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state. |
IS 16585 : 2016 |
| 651 |
BIS For Specification for Carbon manganese steel forgings for pressure vessels |
IS 12146 : 1987 |
| 652 |
BIS For Specification for Steel for valves for internal combustion engines |
IS 7494 : 1981 |
| 653 |
BIS For Galvanized Structural Steel ? Specification |
IS 16732: 2019 |
| 654 |
BIS For Steel for hardening and tempering ? Specification |
IS 5517 : 1993 |
| 655 |
BIS For Tool and die steels ? Specification |
IS 3748 : 1990 |
| 656 |
BIS For Bright steel bars ? v Specification |
IS 9550 2001 |
| 657 |
BIS For Specification for Structural steel for construction of hulls of ships |
IS 3039 : 1988 |
| 658 |
BIS For Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate |
IS 2385 : 1977 |
| 659 |
BIS For Specification for Hot rolled steel strip (bailing) |
IS 1029 : 1970 |
| 660 |
BIS For Specification for Ferronickel |
IS 4409 : 1973 |
| 661 |
BIS For Ferrosilicon ? Specification |
IS 1110 : 1990 |
| 662 |
BIS For Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification |
IS 15997:2012 |
| 663 |
BIS For Stainless Steel Plate, Sheet and Strip- Specification |
IS 6911:2017 |
| 664 |
BIS For Stainless Steel sheets and strips for utensils- Specification |
IS 5522:2014 |
| 665 |
BIS For Stainless Steel Bars and Flats |
IS 6603:2001 |
| 666 |
BIS For Stainless Steel Wires |
IS 6528:1995 |
| 667 |
BIS For Stainless Steel wire Rod |
IS 6527:1995 |
| 668 |
BIS For Structural Steel for Building for Structures with improved seismic Resistance |
IS 15962:2012 |
| 669 |
BIS For Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain) |
IS 15961:2012 |
| 670 |
BIS For High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. |
IS 15914:2011 |
| 671 |
BIS For Fire resistant Steel- Specification |
IS 15103: 2002 |
| 672 |
BIS For Structural Weather resistant steel. |
IS 11587:1986 |
| 673 |
BIS For Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels |
IS 11169 (Part 1): 1984 |
| 674 |
BIS For Bead Wires for Tyres |
IS 4824:2006 |
| 675 |
BIS For Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire. |
IS 4454 (Part 2): 2001 |
| 676 |
BIS For Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire. |
IS 4454 (Part 1) : 2001 |
| 677 |
BIS For Alloy Steel billets, blooms and slabs for forging for general engineering purposes. |
IS 4368:1967 |
| 678 |
BIS For Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables |
IS 3975:1999 |
| 679 |
BIS For Round Steel wire for ropes |
IS 1835:1976 |
| 680 |
BIS For Mild steel wire for General Engineering purposes. |
IS 280: 2006 |
| 681 |
BIS For Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain). |
IS 15965:2012 |
| 682 |
BIS For Continuously pre-painted galvanized steel sheets and coils |
IS 14246:2013 |
| 683 |
BIS For High carbon steel wire rods- Specification |
IS 7904:2017 |
| 684 |
BIS For Hot rolled steel narrow width strip for welded tubes and pipes |
IS 15647:2006 |
| 685 |
BIS For Hot Rolled Carbon Steel Strip for Cold Rolling Purposes ? Specification |
IS 11513:2017 |
| 686 |
BIS For Hot Rolled Steel Strip for Welded Tubes and Pipes. |
IS 10748:2004 |
| 687 |
BIS For Mild steel wire rods for general engineering purposes. |
IS 7887:1992 |
| 688 |
BIS For Hot Rolled bars for production of bright bars and machined parts for engineering applications. |
IS 7283:1992 |
| 689 |
BIS For Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders |
IS 6240:2008 |
| 690 |
BIS For Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes ? Specification. |
IS 5986: 2017 |
| 691 |
BIS For Cold Rolled Steel Strips (Box Strappings). |
IS 5872:1990 |
| 692 |
BIS For Steel Chequered Plates |
IS 3502:2009 |
| 693 |
BIS For Mild steel for metal arc welding electrodes. |
IS 2879:1998 |
| 694 |
BIS For Carbon steel billets, blooms, slabs and bars for forgings. |
IS 1875:1992 |
| 695 |
BIS For Hot Rolled Carbon Steel Sheet, Plate and Strip ? Specification. |
IS 1079: 2017 |
| 696 |
BIS For Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel |
IS 513(Part-2):2016 |
| 697 |
BIS For Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose |
IS 513 (Part-1): 2016 |
| 698 |
BIS For Mild steel and Medium Tensile steel bars and Hard?Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire |
IS 432 : Part 2:1982 |
| 699 |
BIS For Mild Steel and Medium Tensile Steel Bars and Hard?Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars |
IS 432 : Part 1:1982 |
| 700 |
BIS For Hot rolled medium and high tensile structural steel |
IS 2062:2011 |
| 701 |
BIS For Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification. |
IS 15391:2003 |
| 702 |
BIS For Grain oriented electrical steel sheet & strip (CRGO) |
IS 3024:2015 |
| 703 |
BIS For Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) |
IS 648:2006 |
| 704 |
BIS For High strength deformed steel bars and wires for concrete reinforcement |
IS 1786:2008 |
| 705 |
BIS For Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose |
IS 2830:2012 |
| 706 |
BIS For Steel plates for pressure vessels used at moderate and low temperature |
IS 2041:2009 |
| 707 |
BIS For Steel plates for pressure vessels for intermediate and high temperature service including boilers. |
IS 2002:2009 |
| 708 |
BIS For Galvanized steel sheets ( plain and corrugated). |
IS 277:2003 |
| 709 |
BIS For Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete. |
IS 14268:1995 |
| 710 |
BIS For Fusion bonded epoxy coated reinforcing bars |
IS 13620:1993 |
| 711 |
BIS For Uncoated stress relieved strand for Pre-stressed concrete. |
IS 6006:2014 |
| 712 |
BIS For Indented wire for Pre-stressed concrete |
IS 6003:2010 |
| 713 |
BIS For Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire |
IS 1785 (Part 2) : 1983 |
| 714 |
BIS For Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire |
IS 1785 (Part 1) : 1983 |
| 715 |
BIS For Diagnostic Medical X-Ray Equipment |
IS 7620 (Part 1) |
| 716 |
BIS For Clinical thermometers :Part 2 Enclosed scale type |
IS 3055 (Part 2) |
| 717 |
BIS For Clinical thermometers :Part1 Solid stem type |
IS 3055 (Part 1) |
| 718 |
BIS For Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures |
IS 9798 |
| 719 |
BIS For Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity |
IS 8776 |
| 720 |
BIS For Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders |
IS 8737 |
| 721 |
BIS For Welded and seamless steel dissolved acetylene gas cylinders |
IS 7312 |
| 722 |
BIS For Valve fittings for gas cylinder valves for use with breathing apparatus |
IS 7302 |
| 723 |
BIS For Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2) |
IS 7285 (Part 2) |
| 724 |
BIS For Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders |
IS 7285 (Part 1) |
| 725 |
BIS For Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity |
IS 7142 |
| 726 |
BIS For Yoke Type Valve Connection for Small Medical Gas Cylinders |
IS 3745 |
| 727 |
BIS For Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders |
IS 3224 |
| 728 |
BIS For Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG. |
IS 3196 (Part 2) |
| 729 |
BIS For Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG) |
IS 3196 (Part 1) |
| 730 |
BIS For Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases |
IS 3196 (Part 4) |
| 731 |
BIS For Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use |
IS 15100 |
| 732 |
BIS For Liquefied petroleum gas containers for automotive use |
IS 14899 |
| 733 |
BIS For Automotive vehicles- Pneumatic tyres for commercial vehicles-Diagonal and radial ply |
IS 15636 |
| 734 |
BIS For Automotive vehicles-Pneumatic tyres for passenger car vehicles??Diagonal and radial ply |
IS 15633 |
| 735 |
BIS For Automotive vehicles??Pneumatic tyres for two and three-wheeled motor vehicles |
IS 15627 |
| 736 |
BIS For Automotive vehicles??Tubes for pneumatic tyres |
IS 13098 |
| 737 |
BIS For Oil pressure stoves |
IS 1342 |
| 738 |
BIS For Multi-burner oil pressure stoves |
IS 2787 |
| 739 |
BIS For Oil pressure stove, offset burner type |
IS 10109 |
| 740 |
BIS For Glass Feeding Bottles |
IS 5168 |
| 741 |
BIS For Plastic Feeding Bottles |
IS 14625 |
| 742 |
BIS For Milk- cereal Based Complementary foods |
IS 1656 |
| 743 |
BIS For Packaged Drinking Water (Other than Packaged Natural Mineral Water) |
IS 14543 |
| 744 |
BIS For Partly skimmed milk powder |
IS 14542 |
| 745 |
BIS For Food for Special Medical Purpose intended for Infants |
IS 17945: 2022 |
| 746 |
BIS For Infant milk substitutes |
IS 14433 |
| 747 |
BIS For Packaged Natural Mineral Water |
IS 13428 |
| 748 |
BIS For Skimmed milk-powder, extra grade |
IS 13334 (Part 2) |
| 749 |
BIS For Skimmed milk-powder, standard grade |
IS 13334 (Part 1) |
| 750 |
BIS For Sweetened ultra high temperature treated condensed milk |
IS 12176 |
| 751 |
BIS For Condensed milk, partly skimmed and skimmed condensed milk |
IS 1166 |
| 752 |
BIS For Milk-powder |
IS 1165 |
| 753 |
BIS For Processed cereal based complementary foods |
IS 11536 |
| 754 |
BIS For Follow?up formula??complimentary foods |
IS 15757 |
| 755 |
BIS For Multi-Purpose dry batteries |
IS 8144 |
| 756 |
BIS For Elastomer insulated cables (Part.1): For working voltages up to and including1100 V |
IS 9968 (Part 1) |
| 757 |
BIS For Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations |
IS 8828 * |
| 758 |
BIS For PVC insulated cables for working voltages up to and including 1100V |
IS 694 |
| 759 |
BIS For Tungsten filament general service electric lamps (upto100 W ) |
IS 418 |
| 760 |
BIS For Switches for domestic and similar purposes |
IS 3854 |
| 761 |
BIS For Safety of household and similar electrical appliances-Room heaters |
IS 302 (Part 2/Sec 30) |
| 762 |
BIS For Safety of household and similar electrical appliances??Electric stoves |
IS 302 (Part 2/Sec 202) |
| 763 |
BIS For Safety of household and similar electrical appliances??Electric immersion water-heaters |
IS 302 (Part 2/Sec 201) |
| 764 |
BIS For Safety of household and similar electrical appliances???Electric iron |
IS 302 (Part 2/Sec 3) |
| 765 |
BIS For Self Ballasted Lamps for General Lighting Services – Part 1 : Safety Requirements & Part 2 : Performance Requirements |
IS 15111 (Part 1 & 2) |
| 766 |
BIS For AC static transformer operated watt-hour and VAR-hour meters, class 0.2S & 0.5S |
IS 14697 |
| 767 |
BIS For AC static watt-hour meters, class 1 & 2 |
IS 13779 |
| 768 |
BIS For AC watt-hour meters, class 0.5, 1 & 2 |
IS 13010 |
| 769 |
BIS For Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs) |
IS 12640 (Part 2) |
| 770 |
BIS For Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs) |
IS 12640 (Part 1) |
| 771 |
BIS For High Alumina Refractory Cement. |
IS 15895: 2018 |
| 772 |
BIS For Microfine Ordinary Portland Cement- Specification. |
IS 16993: 2018 |
| 773 |
BIS For Composite Cement- Specification. |
IS 16415: 2015 |
| 774 |
BIS For Oil well Cement |
IS 8229 |
| 775 |
BIS For Hydrophobic Portland Cement |
IS 8043 |
| 776 |
BIS For White Portland Cement |
IS 8042 |
| 777 |
BIS For Rapid hardening Portland cement |
IS 8041 |
| 778 |
BIS For Super sulphated cement |
IS 6909 |
| 779 |
BIS For High Alumina Cement for Structural use |
IS 6452 |
| 780 |
BIS For Portland Slag Cement |
IS 455 |
| 781 |
BIS For Masonry Cement |
IS 3466 |
| 782 |
BIS For Ordinary Portland Cement |
IS 269 |
| 783 |
BIS For Portland Pozzolana Cement-Part 2 Calcined clay based |
IS 1489 (Part 2) |
| 784 |
BIS For Portland Pozzolana Cement-Part1 Fly-ash based |
IS 1489 (Part 1) |
| 785 |
BIS For Low heat Portland Cement |
IS 12600 |
| 786 |
BIS For Sulphate Resisting Portland Cement |
IS 12330 |
| 787 |
BIS Registration For Crystalline Silicon Terrestrial Photovoltaic (PV) Modules (Si wafer-based) |
IS 14286 : 2010/ IEC 61215 : 2005, IS/IEC 61730 (Part 1) : 2004 & IS/IEC 61730 (Part 2) : 2004 |
| 788 |
BIS Registration For Utility-Interconnected Photovoltaic Inverters IS 16221 (Part 2) : 2015 & IS 16169 : 2014 |
IS 16221 (Part 2) : 2015 & IS 16169 : 2014 |
| 789 |
BIS Registration For Thin Film Terrestrial Photovoltaic Modules (a-Si, CiGs and CdTe) |
IS 16077 : 2013/ IEC 61646 : 2008, IS/IEC 61730 (Part 1) : 2004 & IS/IEC 61730 (Part 2) : 2004 |
| 790 |
BIS Registration For Cotton Bales : IS 12171:2019 |
IS 12171:2019 |
| 791 |
BIS Registration For Polyphosphoric Acid : IS 17439:2020 |
IS 17439:2020 |
| 792 |
BIS Registration For Trimethyl Phosphite Technical Grade : IS 17412:2020 |
IS 17412:2020 |
| 793 |
BIS Registration For Ortho Phosphoric Acid : IS 798:2020 |
IS 798:2020 |
| 794 |
BIS Registration For Wireless Microphone : IS 616 : 2017 |
IS 616 : 2017 |
| 795 |
BIS Registration For Wireless Keyboard : IS 13252 (Part 1) : 2010 |
IS 13252 (Part 1) : 2010 |
| 796 |
BIS Registration For Wireless Headphone and Earphone : IS 616 : 2017 |
IS 616 : 2017 |
| 797 |
BIS Registration For Webcam (Finished Product): IS 616 : 2017 |
IS 616 : 2017 |
| 798 |
BIS Registration For Visual Display Units / Video Monitors of Screen Size upto 32 inches : IS 13252 (Part 1) : 2010 |
IS 13252 (Part 1) : 2010 |
| 799 |
BIS Registration For Video Camera IS 616 : 2017 |
IS 616 : 2017 |
| 800 |
BIS Registration For Standalone Switch Mode Power Supplies ( SMPS ) with output voltage 48 V ( max ) IS 13252 (Part 1) : 2010 |
IS 13252 (Part 1) : 2010 |
| 801 |
BIS Registration For USB Type External Solid State Storage Devices ( above 256 GB capacity ) : IS 13252 (Part 1) : 2010 |
IS 13252 (Part 1) : 2010 |
| 802 |
BIS Registration For USB Type External Hard Disk Drive: IS 13252 (Part 1) : 2010 |
IS 13252 (Part 1) : 2010 |
| 803 |
BIS Registration For USB Driven Barcode Readers, Barcode Scanners, Iris Scanners, Optical Fingerprint Scanners : IS 13252 (Part 1) : 2010 |
IS 13252 (Part 1) : 2010 |
| 804 |
BIS Registration For UPS and Inverters of Rating upto 5KVA : IS 16242(Part 1):2014 |
IS 16242(Part 1):2014 |
| 805 |
BIS Registration For UPS and Inverters of Rating upto 10KVA: IS 16242 (Part 1) : 2014 |
10KVA: IS 16242 (Part 1) : 2014 |
| 806 |
BIS Registration For Plasma / LED / LCD TV / Smart TV with Screen Size of 32 inches and above IS 616:2010 |
IS 616:2010 |
| 807 |
BIS Registration For Telephone Answering Machines : IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 808 |
BIS Registration For Led Luminaires For Roads And Street Lighting : IS 10322 (Part 5/section 3) : 2012 |
IS 10322 (Part 5/section 3) : 2012 |
| 809 |
BIS Registration For Storage Battery: IS 16270 : 2014 |
IS 16270 : 2014 |
| 810 |
BIS Registration For Standalone Switch Mode Power Supplies ( Smps ) With Output Voltage 48 V ( Max ) : IS 13252 (Part 1) : 2010 |
IS 13252 (Part 1) : 2010 |
| 811 |
BIS Registration For Standalone Led Modules For General Lighting IS 16103 (Part 1) : 2012 |
IS 16103 (Part 1) : 2012 |
| 812 |
BIS Registration For Smart Card Readers : Is 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 813 |
BIS Registration For Set Top Box (STB) : IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 814 |
BIS Registration For Self-Ballasted LED Lamps for General Lighting Services : IS 16102(Part 1):2012 |
IS 16102(Part 1):2012 |
| 815 |
BIS Registration For Sealed Secondary Cells/Batteries containing alkaline or other non-acid electrolytes for use in portable applications part 1 lithium systems: IS 16046:2018 |
IS 16046:2018 |
| 816 |
BIS Registration For Sealed Secondary Cells/Batteries containing alkaline or other non-acid electrolytes for use in portable applications part 2 lithium systems: IS 16046:2018 |
IS 16046:2018 |
| 817 |
BIS Registration For Scanner IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 818 |
BIS Registration For LED Luminaires for Road and Street lighting : IS 10322 (Part 5/Section 3) : 2012 |
IS 10322 (Part 5/Section 3) : 2012 |
| 819 |
BIS Registration For Rice Cooker : IS 302 (Part-2/Section-15): 2009 |
IS 302 (Part-2/Section-15): 2009 |
| 820 |
BIS Registration For Recessed LED Luminaires : IS 10322 (Part 5/Section 2) : 2012 |
IS 10322 (Part 5/Section 2) : 2012 |
| 821 |
BIS Registration For Projector IS 13252 (PART 1): 2010 |
IS 13252 (PART 1): 2010 |
| 822 |
BIS Registration For Printer / Plotter : IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 823 |
BIS Registration For Power Invertors |
IS 16221 (Part-1), IS 16221 (Part-2) : 2015 |
| 824 |
BIS Registration For Power Converters for use in Photovoltaic Power System : IS 16221 (Part-1), IS 16221 (Part-2) : 2015 |
IS 16221 (Part-2) : 2015 |
| 825 |
BIS CRS Registration Power Banks for Use in Portable Applications : IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 826 |
BIS Registration For Power Adaptors for IT Equipments IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 827 |
BIS Registration For Power Adaptors for Audio, Video and Similar Electronic Apparatus IS 616:2010 |
IS 616:2010 |
| 828 |
BIS Registration For Point Of Sale Terminals - IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 829 |
BIS Registration For Plottrs IS 13252(PART 1):2010 |
IS 13252(PART 1):2010 |
| 830 |
BIS Registration For Plasma/lcd/led Television Of Screen Size Up-to 32inch IS 616:2010 |
IS 616:2010 |
| 831 |
BIS Registration For Passport Reader IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 832 |
BIS Registration For Optical Fingerprint Scanners IS 13252 (Part 1):2010 |
IS 13252 (Part 1):2010 |
| 833 |
BIS Registration For Optical Disc Players 200W and above : IS 616: 2010 |
IS 616: 2010 |
| 834 |
BIS Registration For Notebook/tablet Pc - IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 835 |
BIS Registration Mobile phones : IS 13252(PART 1):2010 |
IS 13252(PART 1):2010 |
| 836 |
BIS Registration For Microwave Ovens : IS 302-2-25:2014 |
IS 302-2-25:2014 |
| 837 |
BIS Registration For Processing Machines/Postage Machines/Franking Machines IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 838 |
BIS Registration For lighting Chain : IS 10322 (Part 5/Sec 9) |
IS 10322 (Part 5/Sec 9) |
| 839 |
BIS Registration For LED Tv IS 616:2017 |
IS 616:2017 |
| 840 |
BIS Registration For LED Lighting Chains : IS 10322 (Part 5/Section 7) : 2013 |
IS 10322 (Part 5/Section 7) : 2013 |
| 841 |
BIS Registration For LED Hand Lamps : IS 10322 (Part 5/Section 6) : 2013 |
IS 10322 (Part 5/Section 6) : 2013 |
| 842 |
BIS Registration For LED Flood Lights : IS 10322 (Part 5/Section 5) : 2013 |
IS 10322 (Part 5/Section 5) : 2013 |
| 843 |
BIS Registration For Laptop / Notebook / Tablets : IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 844 |
BIS Registration For Keyboard IS 13252 : 2010 |
IS 13252 : 2010 |
| 845 |
BIS Registration for IRIS Scanners IS 13252 (Part 1):2010 |
IS 13252 (Part 1):2010 |
| 846 |
BIS Registration for UPS and Inverters of Rating upto 10KVA : IS 16242 (Part 1) : 2014 |
IS 16242 (Part 1) : 2014 |
| 847 |
BIS Registration for Induction Stove : IS 302 (Part-2/Section-6) : 2009 |
IS 302 (Part-2/Section-6) : 2009 |
| 848 |
BIS Registration for Fixed General Purpose LED Luminaires : IS 10322(Part 5/Sec 1):2012 |
IS 10322(Part 5/Sec 1):2012 |
| 849 |
BIS Registration for Emergency lighting : IS 10322 (PART 5) Section 8: 2013 |
IS 10322 (PART 5) Section 8: 2013 |
| 850 |
BIS Registration for Electronics Games (Video) IS 616:2010 |
IS 616:2010 |
| 851 |
BIS Registration for Electronic Musical System : IS 616:2010 |
IS 616:2010 |
| 852 |
BIS Registration for Electric Clock : IS 302(Part 2): Section 26:2014 |
IS 302(Part 2): Section 26:2014 |
| 853 |
BIS Registration for Dimmers for LED Products: IS 60669-2-1: 2008 |
IS 60669-2-1: 2008 |
| 854 |
BIS Registration for Digital Camera : IS 13252 (Part 1) |
IS 13252 (Part 1) : 2010 |
| 855 |
BIS Registration for Copying Machines / Duplicators: IS 13252(Part 1):2010 |
IS 13252(Part 1):2010 |
| 856 |
BIS Registration for CCTV Cameras / CCTV Recorders : IS 13252 (Part 1) |
IS 13252 (Part 1) |
| 857 |
BIS Registration for Cash Registers - IS 13252 (Part 1):2010 |
IS 13252 (Part 1):2010 |
| 858 |
BIS Registration for Bluetooth Speakers - IS 616: 2017 |
IS 616: 2017 |
| 859 |
BIS Registration for Barcode scanner - IS 13252 (PART 1) |
IS 13252 (PART 1) |
| 860 |
BIS Registration for USB-driven barcode reader - IS 13252 (PART 1) |
IS 13252 (PART 1) |
| 861 |
BIS Registration for Automatic Data Processing Machine |
IS 13252(PART 1):2010 |
| 862 |
BIS Registration for Automatic Teller Cash Dispensing Machine - IS 13252:2010 |
IS 13252:2010 |
| 863 |
BIS CRS Registration for Amplifiers - IS 616:2017 |
IS 616:2017 |
| 864 |
WPC ETA Certification For Wireless Smart Home Gateway |
EN 300 328 |
| 865 |
WPC ETA Certification For Wireless Keyboard |
EN 300 328 |
| 866 |
WPC ETA Certification For Wireless Nano USB |
EN 300 328 |
| 867 |
WPC ETA Certification For Wireless Pendrive |
EN 300 328 |
| 868 |
WPC ETA Certification For Rfid Antenna |
EN 300 328 |
| 869 |
WPC ETA Certification For Rfid Reader |
EN 300 328 |
| 870 |
WPC ETA Certification For Wireless Tablet |
EN 300 328 |
| 871 |
WPC ETA Certification For Bluetooth Earphone |
EN 300 328 |
| 872 |
WPC ETA Certification For Bluetooth Headphone |
EN 300 328 |
| 873 |
WPC ETA Certification For Bluetooth Speaker |
EN 300 328 |
| 874 |
WPC ETA Certification For Gigabit Dual Band Wireless Router |
EN 300 328 |
| 875 |
WPC ETA Certification For Wireless Transmitters |
EN 300 328 |
| 876 |
WPC ETA Certification For Wireless Terminals |
EN 300 328 |
| 877 |
WPC ETA Certification For Wireless POS Terminal |
EN 300 328 |
| 878 |
WPC ETA Certification For Wireless Music Players |
EN 300 328 |
| 879 |
WPC ETA Certification For WI-Fi Routers |
EN 300 328 |
| 880 |
WPC ETA Certification For Wireless Mouse |
EN 300 328 |
| 881 |
WPC ETA Certification For Wireless Hotspot |
EN 300 328 |
| 882 |
WPC ETA Certification For Wireless Access Point |
EN 300 328 |
| 883 |
WPC ETA Certification For Wireless Access Point |
EN 300 328 |
| 884 |
WPC ETA Certification For Wireless Barcode Scanner |
EN 300 328 |
| 885 |
WPC ETA Certification For Wireless Earphones |
EN 300 328 |
| 886 |
WPC ETA Certification For Water Meter |
EN 300 328 |
| 887 |
WPC ETA Certification For Digital Lock |
EN 300 328 |
| 888 |
WPC ETA Certification For Smartwatch |
EN 300 328 |
| 889 |
WPC ETA Certification For Smart Meter |
EN 300 328 |
| 890 |
WPC ETA Certification For Wireless Transmitter And Receiver |
EN 300 328 |
| 891 |
BEE Registration For High Energy Li-Battery |
BEE Registration For High Energy Li-Battery |
| 892 |
BEE Registration For Tyres/Tires |
Standards : IS 15633 |
| 893 |
BEE Registration For Air Compressors |
Standards : IS 5456 |
| 894 |
BEE Registration For Ultra-High Definition (UHD) Televisions |
Standards : IS 616, IEC 62087 |
| 895 |
BEE Registration For Light Commercial AC Fixed Speed |
Standards : IS 1391 (Part 2) |
| 896 |
BEE Registration For Deep Freezers |
Standards : IS 7872 and Schedule - 25 |
| 897 |
BEE Registration For Solar water Heater |
Standards : IS 12933, IS 16368, IS 16544 and Schedule 23 |
| 898 |
BEE Registration For Microwave Ovens |
Standards : IS 302-2-25, IEC60705 and Schedule 22 |
| 899 |
BEE Registration For Chillers |
IS 16590 and Schedule 21 |
| 900 |
BEE Registration For Diesel Generator Set |
Standards : IS 10000, IS 10001, IS 13364, IS 4889 and Schedule 18 |
| 901 |
BEE Registration For Diesel Engine Driven Monoset Pumps for Agricultural Purposes |
Standards : Schedule 13 |
| 902 |
BEE Registration For Office Automation Products ( Printer, Copier, Scanner, MFD ) |
Standards : Schedule 16 |
| 903 |
BEE Registration For Solid State Inverter |
Standards : IS 13314 and Schedule 17 |
| 904 |
BEE Registration For Ballast (Electronic / Magnetic) |
Standards : IS 1534-1, IS 13021, IS 15885-2-8, IS 14700-3-2, IS16873-5 and Schedule 15 |
| 905 |
BEE Registration For Washing Machine (Semi/Top Load/Front Load) |
Standards : IS 302-2-7, IEC 60456 and Schedule 12 |
| 906 |
BEE Registration For Submersible Pump Set / Agricultural Pump Sets |
Standards : IS 9079, IS 8034, IS 14220, IS 11346 and Schedule 7 |
| 907 |
BEE Registration For General Purpose Industrial Motor ( Induction Motors ) |
Standards : IS 15999, IS 12615 and Schedule 6 |
| 908 |
BEE Registration For Domestic Liquefied Petroleum Gas(LPG) Stoves |
IS 4246 and Schedule 9 |
| 909 |
BEE Registration Computer (Notebook / Laptops) |
BEE Registration For Computer (Notebook / Laptops) |
| 910 |
BEE Registration Ceiling Fans |
Standards : IS 374 and Schedule 8 |
| 911 |
BEE Registration Direct Cool Refrigerators |
Standards : IS 1476 Part 1, Schedule - 5 |
| 912 |
BEE Registration Distribution Transformer |
Standards : IS 1180 Part 1, IS 2026 (Part1, Part 2 and Part 3) and IS 2500 Part-1, Schedule - 4 |
| 913 |
BEE Registration Room Air Conditioners (Cassette, Floor Standing Tower, Ceiling, Corner AC) |
Standards: IS 1391 Part 2, Schedule - 3A |
| 914 |
BEE Registration LED Lamps |
Standards : IS 16102 Part 2, IS 16106 and 14700 (Part 3 / Sec 2), Schedule - 20 |
| 915 |
BEE Registration Tubular Fluorescent Lamps |
Standards : IS 2418 Part 1 and Part 2, Schedule - 2 |
| 916 |
BEE Registration Room Air Conditioner (Variable Speed / Fixed Speed) |
IS 1391 Part 1 and Part 2, Schedule - 3 |
| 917 |
BEE Registration Colour Television ( Color TV / Smart TV ) |
IS 616, IS 13384 (Part 1 and Part 2) and IS 13900 for CRT’s, Schedule - 11 |
| 918 |
BEE Registration Stationary Storage Type Electric Water Heater / Electric Geysers |
IS 2082, Schedule - 10 |
| 919 |
BEE Registration For Frost-Free Refrigerators |
IS 15750, Schedule - 1 |
